Location: Home > Features > Architecture > Interface Cards > TC3846-6

TC3846-6: 4-Ch. 600Ω Analog & 4-Ch. Dry Contact IP Gateway

Download TC3846-6 Datasheet
394 KB

TC3846-6 4-Ch. 600Ω Analog & 4 Ch. Dry Contact IP Gateway
    Contents
  1. Features
  2. Overview
  3. Application
  4. Environmental & EMI Compliance
  5. Specifications
  6. Information Request Form

Features

  • Extends 4 Ch. 2/4-wire 600Ω Analog & 4 Ch. Dry Contact
  • Extremely Low Latency
  • VLAN & QoS Support
  • Temperature & Power Consumption Monitoring
  • Extreme Temp (-40°C to +80°C)Optional
  • Meets or Exceeds I EC 61850-3, IEEE 1613 & NEMA TS-2 Standards
  • Member of JumboSwitch ­ Product Family

Overview
Back to top



Featuring extremely low latency, the TC3846-6 Analog + Dry Contact IP Gateway links or extends 4 channels of 600Ω 2/4 wire analog and 4 channels of dry contacts across Layer 2/3 Ethernet networks. It is simple to configure and supports point-to-point and point-to-multipoint topologies.

The TC3846-6 supports frequencies from 300Hz to 3.4KH and achieves minimal end-to-end processing delay (latency) by using high performance buffering and forwarding technology. Two operation modes allow bandwidth savings for point-to-point applications. The TC3846-6 is capable of running continuous pilot tones without interruption or quality degradation. This is possible because the usage of proprietary technology that, unlike VoIP, uses a common clock for both ends.

VLAN and QoS for packet prioritization ensure reliable communications. Other key features include Traffic Monitoring and Statistics, Network Time Server (NTP Server), Remote Firmware Upgrade and Temperature and Power Consumption Monitoring. Diagnostics include LED indicators and local and remote loop back.

Setup, diagnostics, and management are accessed via Web, SNMP, Serial Console, and Telnet. An industrial hardened version
(-40°C to +80°C) complies with all pertinent industry and environmental standards including IEC 61850-3, IEEE 1613 & NEMA TS-2.

The TC3846-6 fits any JumboSwitch® chassis option including 2S Standalone chassis and 1U/2U/4U card cages. Power supply options are 12VDC, 24VDC, -48VDC, 125VDC (available on 1U/2U/4U card cages only) or 115/230VAC.

Application
Back to top



Typical applications include linking or extending various 600Ω analog, audio and intercom devices, (e.g. Frequency Shift Keying [FSK] modems), E&M, teleprotection relay controllers, and dry contacts over Layer 2/3 IP networks.

It is also used to improve voice quality and increase system reliability in harsh environments, to replace unreliable leased phone circuits and to stabilize voice level settings for 600Ω audio channels. JumboSwitch Extends Analog connections across your network

Environmental & EMI Compliance
Back to top


JumboSwitch Extends Analog connections across your network

Specifications
Back to top


Connection Capacity

  1. 600Ω (2/4 Wire)4 Ports
  2. Dry Contact4 Ports
  3. Ethernet1 Port

Electrical

  1. Dry Contact Interface
  2. Normal OpenStandard
  3. Normal CloseOptional
  4. Load Voltage (Peak AC)60V
  5. Load Voltage (DC)60V
  6. Continuous Load Current0.55A
  7. Peak Load Current1.2A
  8. Max on Resistance2.5 Ω
  9. Output Capacitance150pF
  10. Detector Max Input Voltage9V
  11. 600Ω Analog Interface
  12. Impedance600Ω
  13. Max Input3Vp-p
  14. Frequency band300 to 3400Hz
  15. Ethernet Interface
  16. Standards IEEE 802.3, 802.3u, 802.1p&Q
  17. ConnectorRJ45
  18. Console PortRJ45

Regulatory Approval

  1. CE, FCC Part 15, CISPR (EN55022) CLASS A, IEC 61850-3, IEEE 1613, NEMA TS-2

System

  1. Bit Error Rate 1 in 1010 or Better

Diagnostic Functions

  1. Local and Remote Loopback for Analog and Ethernet

LEDs

  1. Unit StatusPWR (A, B), Alarm,Vcc, CS, MS
  2. ChannelStatus
  3. EthernetLink/Act

Power

  1. Standard12VDC
  2. Optional24VDC, -48VDC, 125VDC (1U/ 2U/ 4U only), 90-260 VAC, 50/60Hz
  3. Power Consumption<10W

Operating Temperature

  1. Bit Error Rate 1 in 1010 or Better
  2. Standard Temperature-20°C to 70°C
  3. Extreme Temperature -40°C to 80°C

Storage

  1. Temperature-40°C to 90°C
  2. Humidity95% non-condensing

Physical (rack mount card)

  1. Height(3.15 cm) 1.24"
  2. Width(17.78 cm) 7.0"
  3. Depth(22.86 cm) 9.0"
  4. Weight(0.3 kg) 0.75 lbs
Note - Information contained in this data sheet is subject to change without prior notice. 010B

Information Request Form
Back to top

 

Select the items that apply, and then let us know how to contact you.

Send product literature      Model:  
Have a salesperson contact me

      
   Name: 
  Title: 
Company: 
Address: 
 E-mail: 
  Phone: 
    FAX: 
                                        
  Comments: 
                              
I Initially heard of JumboSwitch from:

  Google
  Yahoo
  Bing
  Referral
  Magazine
  Trade Show

  Other

                                

© 2010, TC Communications, Inc.  All rights reserved.
17881 Cartwright Road - Irvine, CA 92614
Tel:(949) 852-1972, Sales:(800) 569-4736 
Fax:(949) 852-1948, sales@tccomm.com