Location: Home > Features > Architecture > Interface Cards > TC3846-4
TC3846-4: 4-Ch. 600Ω Analog-over-IP Gateway

TC3846-4 - 4-Ch. 600Ω Analog-over-IP Gateway
Contents
- Features
- Overview
- Application
- Environmental & EMI Compliance
- Specifications
- Information Request Form
Features
- Extends 2/4-wire 600Ω Audio and Data Channels
- Extremely Low Latency
- VLAN & QoS Support
- Temperature & Power Consumption Monitoring
- Extreme Temp (-40°C to +80°C) Optional
- Meets or Exceeds I EC 61850-3, IEEE 1613 & NEMA TS-2 Standards
- Member of JumboSwitch Product Family
The TC3846-4 is ideal for situations where a user needs to extend 600Ω analog connections across existing Layer 2/Layer 3 networks and low latency is important.
The TC3846-4 achieves minimal end-to-end processing delay (latency) by using high performance buffering and forwarding technology. Two operation modes are available that allow bandwidth savings in point-to-point applications. For reliable communications, the TC3846-4 supports VLAN and QoS for packet prioritization.
Key features include Traffi c Monitoring and Statistics, Network Time Server (NTP Server), Remote Firmware Upgrade and Temperature and Power Consumption Monitoring.
Setup, diagnostics, and management are accessed via Web, SNMP, Serial Console, and Telnet. Diagnostics include LED indicators and local and remote loop back to assist with troubleshooting and maintenance.
The TC3846-4 interface card can fi t into any available JumboSwitch housing option including 2S Standalone chassis and 1U/2U/4U card cages. Power supply options are 12VDC, 24VDC, -48VDC or 115/230VAC. Standard operating temperature is -20°C to +70°C and the extreme temperature version is -40°C to +80°C.
Typical applications include extending 600Ω analog connections across IP networks.
For example, the TC3846-4 is typically used in applications where there is a need to extend Frequency Shift Keying (FSK) modems across Layer2/Layer3 IP networks.
It is also used to improve voice quality and increase system reliability in harsh environments, to replace unreliable leased phone circuits and to stabilize voice level settings for 600Ω audio channels.

Environmental & EMI Compliance
The JumboSwitch product family meets all pertinent industry-specifi c standards for environmental, performance and security requirements including IEC 61850-3, IEEE 1613, NEMA TS-2 and NERC CIP. Furthermore, future JumboSwitch family products will continue to be compliant with both existing and emerging industry standards and requirements, including developing Ethernet standards. Please refer to the charts below for specifi c standards compliance information.
Connection Capacity
- 600Ω (2/4 Wire)4 Ports
- Ethernet1 Port
Electrical
- 600Ω analog interface
- Impedance600Ω
- Max Input3Vp-p
- Frequency band300 to 3400Hz
System
- Bit Error Rate 1 in 1010 or Better
Diagnostic Functions
- Local and Remote Loopback for Analog and Ethernet
Regulatory Approval
- CE, FCC Part 15, CISPR (EN55022) CLASS A, IEC 61850-3, IEEE 1613, NEMA TS-2
LEDs
- Unit StatusPWR (A, B), Alarm,Vcc, CS, MS
- ChannelStatus
- EthernetLink/Act
Power
- Standard12VDC
- Optional24VDC, -48VDC, 90-260 VAC, 50/60Hz
- Power Consumption< 10W
Operating Temperature
- Bit Error Rate 1 in 1010 or Better
- Standard Temperature-20°C to 70°C
- Extreme Temperature -40°C to 80°C
Storage
- Temperature-40°C to 90°C
- Humidity95% non-condensing
Physical (rack mount card)
- Height(3.15 cm) 1.24"
- Width(17.78 cm) 7.0"
- Depth(22.86 cm) 9.0"
- Weight(0.3 kg) 0.75 lbs
Note - Information contained in this data sheet is subject to change without prior notice. 010B
©
2010, TC Communications, Inc. All
rights reserved.
17881 Cartwright Road - Irvine, CA 92614
Tel:(949) 852-1972, Sales:(800) 569-4736
Fax:(949) 852-1948, sales@tccomm.com
|