Location: Home > Features > Architecture > Interface Cards > TC3846-1
TC3846-1: G.703/64K-over-IP Gateway  
 

Features

Applications

Description

Technical Specifications

Information Request Form

  • Extends G.703/64k Co-directional Interface over Ethernet

  • Less Than 5 msec. Latency, One Way

  • Point-to-Point & Point-to-MultiPoint Applications

  • VLAN and QoS Support

  • Manage Via Web, SNMP, Serial Console, Telnet

  • Temperature & Power Consumption Monitoring

  • Extreme Temp (-40°C to +80ºC) Optional

  • Meets or Exceeds IEC 61850-3, IEEE1613 & NEMA TS-2 Standards

  • Member of the JumboSwitch® Product Family

TC3845 Standalone
Click here to view large image


Data Sheet

 
  Talk to a sales engineer on this product

 


Applications

Typical applications include extending G.703 circuits across IP networks. For example, the TC3846-1 is used to extend Teleprotection relays with a G.703/64K interface over existing Layer 2 / Layer 3 Networks.

TC3845 Application Diagram

Top

 


Description

Featuring extremely low latency of less than 5 msec., one way, the TC3846-1 G.703/64k-over-IP Gateway extends 64kbps G.703
co-directional circuits over Ethernet/IP networks. It is simple to configure and supports both point-to-point and point-to-multi point topologies.

Extremely low latency (minimal end-to-end processing delay) is achieved by using high-performance adaptive clock recovery, buffering and forwarding technology. To insure reliable communications, the TC3846-1 supports VLAN and QoS for packet prioritization.

Key features include Traffic Monitoring and Statistics, Network Time Server (NTS), Remote Firmware Upgrade and Temperature and Power Consumption Monitoring.

Setup, diagnostics, and management are accessed via Web, SNMP, Serial Console, and Telnet. Diagnostics include LED indicators and local and remote loopback to assist with troubleshooting and maintenance.

Each G.703/64k channel is independent and transparent to protocols and signaling used. Clear channel and octet aligned modes are supported.

The TC3846-1 interface card can fit into any available JumboSwitch housing option including 2S Standalone chassis and 1U/2U/4U card cages. Power supply options are 12VDC, 24VDC, -48VDC or 115/230VAC. Standard operating temperature is -20°C to +70°C and the extreme temperature version is -40°C to +80°C.

Top

 


 

Technical Specifications

Data Rates
G.703 64kbps
Ethernet 10/100 Mbps Full Duplex
Console Port 9.6K
Connection Capacity
G.703/64K 2 Channels
Ethernet 1 Port
Electrical
G.703/64k Line Code AMI
G.703/64k Standards G.703, G.823
G.703/64k Connector RJ-45F
G.703/64k Impedance 120 Ohm
Ethernet Standards IEEE 802.3, 802.3u, 802.1p&Q
Ethernet Connector RJ-45F
Ethernet Console Port RJ-45F
System
Bit Error Rate 1 in 1010 or better
Visual Indicators
Unit Status PWR (A, B) Alarm, Vcc, CS, MS
G.703/64K Status
Ethernet Link/Act
Diagnostic Functions
Local and Remote Loopback for G.703/64K & Ethernet
Power
Standard 12 VDC
Optional 24VDC, -48VDC, 90-260 VAC, 50/60 Hz
Power Consumption <10w
Operating Temperature
Normal -20C° to 70°C (optional)
Extreme -40C° to 80°C
Storage Temperature
Normal -40C° to 90°C
Humidity 95% non-condensing
Physical (rack mount card)
Height (3.15 cm) 1.24”
Width (17.78 cm) 7.0”
Depth (22.86 cm) 9.0”
Weight (0.3 kg) 0.75 lbs

Top

 


 

Information Request Form

Select the items that apply, and then let us know how to contact you.

Send product literature      Model:  
Have a salesperson contact me

      Name: 
     Title: 
   Company: 
   Address: 
    E-mail: 
     Phone: 
       FAX: 
              
  Comments: 
              
II Initially heard of JumboSwitch from:

  Google
  Yahoo
  Bing
  Referral
  Magazine
  Trade Show


  Other

                                

Top

© 2010, TC Communications, Inc.  All rights reserved.
17881 Cartwright Road - Irvine, CA 92614
Tel:(949) 852-1972, Sales:(800) 569-4736 
Fax:(949) 852-1948, sales@tccomm.com